ETN210_12M

Need

Surprisingly, most machine suppliers don’t integrate a takeout system themselves.
As a result, the need arose for a system to grab the bottles from the machine. And then set them down on a conveyor, feeding the bottles out of the machine, towards the downstream.

Therefore, we at Delta Engineering include a vacuum conveyor option on all our machines. The vacuum ensures a stable setdown of the bottles, especially with unstable, top-heavy bottles.
Moreover, this is even a necessity on faster lines.

Additionally, the takeout system will increase your line OEE. Also, we will make it fit in perfectly with your downstream. Especially the conveying part with our 15° junctions will ensure a trouble-free operation, avoiding fallen bottles.
 

Important notes

We have a range of standard takeout systems, but we can also design one for your ‘not listed’ machine.

• However, taking care is important when designing machine takeouts, because machine suppliers often won’t share their 3D machine files.
  This creates extra risks, as often our customers have already ordered the machine and we would only be able to measure the details when the machine is on site. Mostly, there is no time to wait for the engineering phase and this can have undesired outcomes. Of course, this is only the case for non-listed machines on our site, or with new versions of it.
  Therefore, it is important to be careful and to allow enough time in the planning to do this the right way.

 

• Besides, takeout systems have another burden as well, namely machine safety.
  Although it is often disregarded, basically no alterations on the machine’s safety standards are possible, even if they are not safe by default. Often, takeouts are sold with a built-in declaration, leaving responsibility with the plant manager or the owner of the business.
  For this reason, we believe it is better to buy this equipment from the machine manufacturer, keeping responsibilities intact.

In any case, we can help you and have the engineering capacity to design whatever needed for you to get the bottles out in a safe way!

We have different solutions proven over time, listed on our site.
 

The machine

The ETN210_12M is a fully integrated empty bottle takeout system to be placed in front of the NISSEI ASB-12M blow moulder.

Furthermore, the ETN210_12M just sticks out enough to allow the chain conveyor CD083 to come out. By doing so, we can perfectly integrate this machine with our downstream equipment, leak testers, baggers , tray packers, vision systems, etc…
 

OTHER VERSIONS

Takeout system for NISSEI blow moulder type 12N/10: ETN210_12N10,
for NISSEI blow moulder type 50MB: ETN210_50MB,
and for NISSEI blow moulder type 70DPH: ETN210_70DPH

Take-out system for AOKI blow moulder type 250: ETN200_250,
for AOKI blow moulder type 350: ETN200_350,
and for AOKI blow moulder type 500 (servo): ETN200_500

Takeout system for KAUTEX blow moulder type KEB3: ETN220_KEB3,
for KAUTEX blow moulder type KEB5: ETN220_KEB5

Take-out system for 1 BLOW blow moulder – with integrated high voltage leak tester: ETN231