ETN210_12N10

Need

Surprisingly, most machine suppliers don’t integrate a take out system themselves.
As a result, the need arose for a system to grab the bottles from the machine. And then set them down on a conveyor, feeding the bottles out of the machine, towards the downstream.

Therefore, we at Delta Engineering include a vacuum conveyor option on all our machines. The vacuum ensures a stable setdown of the bottles, especially with unstable, top-heavy bottles.
Moreover, this is even a necessity on faster lines.

Additionally, the take out system will increase your line OEE. Also, we will make it fit in perfectly with your downstream. Especially the conveying part with our 15° junctions will ensure a trouble-free operation, avoiding fallen bottles.
 

Important notes

We have a range of standard take out systems, but we can also design one for your ‘not listed’ machine.

• However, taking care is important when designing machine takeouts, because machine suppliers often won’t share their 3D machine files.
  This creates extra risks, as often our customers have already ordered the machine and we would only be able to measure the details when the machine is on site. Mostly, there is no time to wait for the engineering phase and this can have undesired outcomes. Of course, this is only the case for non-listed machines on our site, or with new versions of it.
  Therefore, it is important to be careful and to allow enough time in the planning to do this the right way.

 

• Besides, take out systems have another burden as well, namely machine safety.
  Although it is often disregarded, basically no alterations on the machine’s safety standards are possible, even if they are not safe by default. Often, takeouts are sold with a built-in declaration, leaving responsibility with the plant manager or the owner of the business.
  For this reason, we believe it is better to buy this equipment from the machine manufacturer, keeping responsibilities intact.

In any case, we can help you and have the engineering capacity to design whatever needed for you to get the bottles out in a safe way!

We have different solutions proven over time, listed on our site.
 

The machine

The ETN210_12N/10 is a fully integrated empty bottle take out system to be placed in front of the NISSEI ASB-12N/10 blow moulder.

Furthermore, the ETN210_12N/10 just sticks out enough to allow the chain conveyor CD083 to come out. By doing so, we can perfectly integrate this machine with our downstream equipment, leak testers, baggers , tray packers, vision systems, etc…
 

OTHER VERSIONS

Take out system for NISSEI blow moulder type 12M: ETN210_12M,
for NISSEI blow moulder type 50MB: ETN210_50MB,
and for NISSEI blow moulder type 70DPH: ETN210_70DPH

Takeout system for AOKI blow moulder type 250: ETN200_250,
for AOKI blow moulder type 350: ETN200_350,
and for AOKI blow moulder type 500 (servo): ETN200_500

Take out system for KAUTEX blow moulder type KEB3: ETN220_KEB3,
for KAUTEX blow moulder type KEB5: ETN220_KEB5

Takeout system for 1 BLOW blow moulder – with integrated high voltage leak tester: ETN231